Tag Archives: speed gearbox reducer

in Changwon Republic of Korea sales price shop near me near me shop factory supplier Variable Speed Gear Motor Transmission Udl Gearbox Speed Reducer Good Price Best Coaxial Stepless Diecast Aluminium Alloy Silent Vibration-Free Running Variator manufacturer best Cost Custom Cheap wholesaler

  in Changwon Republic of Korea  sales   price   shop   near me   near me shop   factory   supplier Variable Speed Gear Motor Transmission Udl Gearbox Speed Reducer Good Price Best Coaxial Stepless Diecast Aluminium Alloy Silent Vibration-Free Running Variator manufacturer   best   Cost   Custom   Cheap   wholesaler

Fantastic consideration has been paid on environmental safety and strength saving. “We are usually serving our customers with our ideal products.” In this way, our goods have ongoing to gain market place acceptance and consumers gratification in excess of the earlier couple of years.

Variable Velocity Gear EPT EPT Udl EPT Pace EPT Excellent Cost Best CoaXiHu (West Lake) Dis.al Stepless Diecast Aluminium Alloy Silent Vibration-Cost-free Managing Variator

UDL Sequence planetary cone amp disk step-less pace variator

higher good quality and reduced value
pls really feel totally free to get in touch with with us if you have any dilemma

….

Variator and speed motorvariator

For EPT scores from ,fifteen to 9,two kW.
Silent, vibration-cost-free running.
Large efficiency.
Bidirectional rotation.
Management handwhel positional on possibly facet.
Pace repeatability at max: plusmn ,five%
Speed repeatability at min: plusmn ,1%.
Regulaton sensibility: ,5 rpm.
Casings (TX): diecast aluminium alloy.
Shafts: circumstance hardened and tempered 20Cr steel right after floor gtHRC60

Inner components: 100Cr6 warmth-treated metal.

All the dimensions are painted with Ral 5571 blue epoxy-polyester powder.
Variator and pace motorvariator.

For EPT scores from ,15 to 9,two kW.
Silent, vibration-free of charge operating.
Large efficiency.
Bidirectional rotation.
Management handwhel positional on either facet.
Velocity repeatability at max: ,five%
Velocity repeatability at min: ,1%.
Regulaton sensibility: ,five rpm.
Casings (TX): diecast aluminium alloy.
Shafts: scenario hardened and tempered 20Cr steel soon after ground gtHRC60

Inside elements: 100Cr6 warmth-treated metal.

All the sizes are painted with Ral 5571 blue epoxy-polyester powder.

  in Changwon Republic of Korea  sales   price   shop   near me   near me shop   factory   supplier Variable Speed Gear Motor Transmission Udl Gearbox Speed Reducer Good Price Best Coaxial Stepless Diecast Aluminium Alloy Silent Vibration-Free Running Variator manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Changwon Republic of Korea  sales   price   shop   near me   near me shop   factory   supplier Variable Speed Gear Motor Transmission Udl Gearbox Speed Reducer Good Price Best Coaxial Stepless Diecast Aluminium Alloy Silent Vibration-Free Running Variator manufacturer   best   Cost   Custom   Cheap   wholesaler

China manufacturer & factory supplier for NMRV040 in Tunis Tunisia worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With high quality best price & service

China manufacturer & factory provider for NMRV040  in Tunis Tunisia  worm equipment velocity reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With high quality best value & provider

Company of regular and customized roller chains. Suitable for aging, anxiety relieving, heat managing and powder coating purposes. Aerospace, automotive, military, strength, composite, pharmaceutical and a variety of other industries served. Turnkey systems integration and most objects offered in stock.Services & Top quality controlWe source comprehensive drawings and offer you anytime essential.

Overview

Fast Details

Relevant Industries:

Producing Plant

Brand Title:

OEM

Merchandise NO:

SYF

Model Variety:

NMRV

Solution Keywords and phrases:

nrv worm gearbox,nrv worm equipment velocity reducer,nrv worm gear

Colour:

Blue

Merchandise title:

Worm Equipment Screw Jack

EPG is inclined to cooperate sincerely and produce commonly with close friends! Content:

Aluminium Alloy

Application:

Equipment Device

Bearing:

NSK

Certificate:

ISO9001

Ratio:

5-a hundred

Packaging & Delivery

Lead Time
:
Amount(Parts) 1 – five hundred >500
Est. Time(days) 20 To be negotiated

On-line Customization

Worm equipment reducers are utilised in lower to average horsepower apps. They supply minimal preliminary expense, substantial ratios, and high output torque in a tiny package. Worm gear reducers have a a lot increased tolerance for shock loading then helical equipment reducers. Many worm equipment reducers are interchangeable in between manufacturers.

Mounting Dimension

The products are broadly used in the producing equipments of all types of industries inside and outdoors China. They are the greatest alternatives for nowadays modern day facilities of mechanical minimizing push control to recognize huge twisting length, huge equipment ratio, tiny sound, large efficiency and stability.

Design:

NMRV025, 030, 040, 050, 063, 075, 090, a hundred and ten, one hundred thirty, 150

Ratio:

one:5,7.5,10,fifteen,twenty,twenty five,thirty,forty,50,sixty,80,one hundred

Shade:

Blue, Silver Or On Buyer Ask for

Sounds:

minimal noise (<50DB)

Benefit:

Successful and protected running

Substance:

Housing: Die-Solid Aluminum Alloy

Worm Equipment-Bronze 9-4#

Worm-20CrMnTi with carburizing and quenching, area harness is fifty six-62HRC

Shaft-chromium metal-forty five#

Packing:

Carton and Wood Case

Bearing:

C&U Bearing

Seal:                      

NAK SKF

Certification:

ISO9001,CE,3C,OEM

Warranty:

12 months

Input Energy:   

.06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       

Usages:

Industrial Device: Foodstuff Things, Ceramics,CHEMICAL,Packing,Dyeing,

Woodworking,Glass.

IEC Flange:

56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5

Lubricant:

Artificial & Mineral

Product Deseription

One Phase Worm Equipment Reducer.

The reducer which design is twenty five~ninety made of Aluminum alloy die-casting box,good searching in appearance,compact in composition,rust proofing on area and small quantity to conserve mounting room.
The reducer product of 110~one hundred fifty is created of cast iron which casted with Aluminum mould.It`s good looking and strong, and can be employed by way of the placing of multi-azimuth.
Great radiating characterstic qualified prospects protected and dependability,and large effectiveness for using.
The robust capacity of loading guarantee secure transmission,make less Our patented coupling system C Line is the consequence of our knowledge and advancement. It permits effortless coupling and uncoupling of the PTO push shaft. The include gives the person far more comfort because of its ergonomically and compact kind. The users’ stability is confident, because he can’t get entangled in protruding components of the yoke. There is also considerably less dust present at managing and there are fewer troubles related with it.vibration and noise.
Varies of connecting structure for electrical power input and torque output satisfy different need-meritsthe design of box define and the established of foot hole with good versality is apt to several kinds of mounting.

The NMRV worm gearbox is new technology of goods by our manufacturing facility on the basis of perfecting WJ collection goods with compromise of superior technological innovation the two at residence and abroad.It truly is apprearance adopts sophisticated square box composition.It truly is outer entire body is produced of higher good quality aluminium alloy die casting into forming.It really is small in volume,mild weight,higher in radiating effectiveness,large in output torque,clean in operating and low sound.It truly is suitbale for all positions.

Strategy for product chosen

Please recognize the following at 1st in buy to delect the product of RV pace reducer properly.

– Loading condition
 – Velocity scope or ratio in software
– Operating situation and environment
– Installation space

Firm profile

HangZhou EPT Group – a single of the greatest gearbox maker in China – Electromechanical Facilities Co. Ltd

HangZhou EPT Group – one particular of the biggest gearbox maker in China – Electromechanical Equipment Co., Ltd.is a gift business integrating growth, design, production and product sales,Principal marketing items consist of reducer motor,water pump,development machinery and areas,bearings,hardware and electrical products,plastic products,Labour safety appliance.Our firm always adhere to the operation principle which is made up of men and women-oriented, innovation as the soul,be ready for threat in times of peace, unremitting……

Application region

Certifications

In depth Photos

Packing & Shipping

Packaging

Dimension

five hundred (L) * five hundred (W) * four hundred (D)

Bodyweight

one.2 T

Packaging Specifics

The typical package deal is picket box(Size: L*W*H). If export to european countries,the wood box will be fumigated.If container is way too tigher,we will use pe movie for packing or pack it according to buyers special ask for.

Packaging

Dimension

five hundred (L) * five hundred (W) * four hundred (D)

Bodyweight

1.2 T

Packaging Specifics

The standard bundle is wood box(Dimensions: L*W*H). If export to european nations around the world,the wood box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers unique request.

FAQ

Q1: Are you investing company or producer ?

A: We are a manufacturer in ZheJiang China.welcome to our manufacturing facility to have a visit.

Q2: How we pick models and technical specs?

A:You can email us the series title & code (for illustration: WJ series worm gearbox) as nicely as prerequisite details, such as motor electricity, output pace or ratio, service element or your software…as significantly knowledge as achievable. If you can source some photographs or drawings, it is greater.

Q3: How is your cost? Can you provide any price cut?

A: We will give the greatest value we can base on your demands and the quantities.

This fall: How long need to I wait around for the opinions after I send the enquiry?

A: In 12 several hours.

Q5: What is your product guarantee interval?

A:We provide one yr guarantee since the vessel departure date still left China.

Q6: What industries are your gearboxes currently being employed?

A:Our gearboxes are extensively utilized to metallurgical products, mining equipment, automation tools, foods equipment, packaging tools, tobacco products and so on.

Make contact with us

Cell: +86-13083988828 we chat # or 0086-571-88220971 (WeChat)
E-mail:hzptcorp (a) gmail.com
Fox:+86-571-88220972
Include:No.789 ShenHua Road, , XiHu District, HangZhou, ZheJiang, China
HangZhou EPT Team – 1 of the greatest gearbox manufacturer in China – Electromechanical Amenities Co. Ltd.

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With high top quality very best cost & support

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With high quality very best price & support

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With higher good quality ideal price & provider

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With large top quality greatest price tag & support

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With higher high quality ideal price tag & service

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With substantial high quality greatest value & support

China manufacturer & factory supplier for NMRV040  in Tunis Tunisia  worm gear speed reducer NEMA23 Stepper Gearbox ratio 100 1 for stepper motor With high high quality very best cost & support

China manufacturer & factory supplier for H B in Bordeaux France series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

EPG electricity transmission merchandise are created to supply both reliable functionality and value-performance. Each solution is utility-examined and engineered to fulfill stringent expectations for uniformity in dimension, warmth treatment method, tensile toughness and other crucial qualities. As a price-successful different designed particularly for common-obligation use, EPG’s growing line of merchandise are accessible in all regularly ordered dimensions and specifications, which includes ball bearings, mounted units, roller chain, seals, gauges, sheaves and more.”We are usually serving our consumers with our ideal merchandise.”

Overview

Quick Specifics

Relevant Industries:

Constructing Content Stores

Gearing Arrangement:

Helical

Output Torque:

470000Nm

Enter Pace:

750-1500rpm

Output Velocity:

1.7~1200rpm

Location of Origin:Zhejiang, China
Model Name:

OEM

Certification:

ISO9001-2008

Mount Placement:

Foot Mounted

Bearing:

C&U

Source Potential

Source Capability:
five hundred Unit/Units per Thirty day period

Underneath the guidance of managerial feeling of “Serving agriculture, scoring a success by means of top quality of items and honesty in organization”, our items have been trustworthy by clients and have received a bigger share of marketplace.

Packaging & Shipping and delivery

Packaging Specifics
Standard wood case
Port
Ningbo Port, Shanghai Port
Lead Time
:
Quantity(Boxes) 1 – 1 >1
Est. Time(days) twenty To be negotiated

On the internet Customization

It was born in 1997, and is the fruit of the merger of diverse gearboxes brands. From the initial merchandise, it inherited a philosophy based in good quality, profitability and technical rigor. EPG is existing in all european market place, through a total distribution chain consisting of every market’s principal actors.

Item Description

H/B series high power pace gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission

H/B series large electrical power pace gear reducer industrial gearbox for concrete mixer has the attributes of higher flexibility,very good mix and hefty loading capacity, alongside with other merits this sort of as straightforward to achieve numerous transmission ratios, high performance, minimal vibration and substantial permissible axis radial load. 

1) Output pace: 1.7~1200r/min

two) Output torque: up to forty seven,000N.m
3) Motor electrical power: 2.fifty two~5366kW
4) Mounted type: foot-mounted ,flange-mounted, axis mounted, shrink mounted

Solution Identify

H/B sequence high power velocity gear reducer industrial gearbox for concrete mixer

Housing Material

HT 250 Cast Iron

Gear Content

20CrMnTi

Shaft Material 

20CrMnTi

Equipment ProcThe top quality of merchandise is for us and for our consumers of high importance. This is why we use European made components in our goods. We also carry out consistent manage of incoming materials and the management of completed merchandise. In our business we operate according to ISO 9001.essing

Grinding finish by HOFLER Grinding Machines

Shade

Personalized

Sound Take a look at

Bellow 65dB

Guarantee

1 year

NMRV worm gearbox reducer is a commodity with sophisticated design and steady enhancements, its major functions are produced of high quality aluminum alloy, light bodyweight and non-rusting, larget output toque, clean managing and minimal noise, high radiating performance, good seeking apprearance, derable services life, little volume and ideal for all mounting positions.

Relevant item

Firm Profile

Packing & Delivery

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

China manufacturer & factory supplier for H B  in Bordeaux France  series high power speed gear reducer industrial gearbox for concrete mixer mechanical variator drive power transmission With high quality best price & service

Best China manufacturer & factory High in Aden Yemen torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

The new products include a series of high-tech and high quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, high-speed tooth chains, timing chains, self-lubrication chains, among which have type high speed tooth chain for car branch dynamic box and aerial chains fill in the blanks of chain in China.

Overview

Quick Details

Applicable Industries:

Manufacturing Plant

ITEM NO:

SYF

Color:

Blue

Product name:

BLD Cycloid Speed Reducer

Application:

Machine Tool

Material:

Steel

Bearing:

NSK

Certificate:

ISO9001

Ratio:

9-28800

Mounting Position:

Horizontal (foot Mounted)

Input Form:

IEC Flange

Packaging & Delivery

Lead Time
:
Quantity(Bags) 1 – 1000 >1000
Est. Time(days) 10 To be negotiated

Online Customization

Product Description

Cycloidal gear reducer is a principle adopted K-H-V Planetary Gear less innovative gear. Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with two eccentric turn as a roller bearing arm, the formation of H-, two cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.

Type

stage

Model

Ratio

Nominal Power (KW)

Nominal Torque(N.m)

X/B Series Cycloidal Reducer

Single reducer

B09/X1

           9-87

0.55-0.18

26-50

B0/X2

1.1-0.18

58-112

B1/X3

0.55-0.18

117-230

B2/X4

4-0.55

210-400

B3/X5

11-0.55

580-1010

B4/X6/X7

11-2.2

580-1670

B5/X8

18.5-2.2

1191-3075

B6/X9

15-5.5

5183-5605

B7/X10

11-45

7643

Type

stage

Model

Ratio

Nominal Power (KW)

Our PTO drive shafts enable the user easy maintenance. The greasing nipples on standard crosses are positioned under angle to enable the user better access. Easier access is also possible because of the flexible cone. We listened to the wishes of our customers and placed the greasing nipple at wide-angle PTO’s into the cross bearing. The other novelty, we introduced with wide-angle PTO drive shafts is in line greasing. We wanted to additionally simplify the maintenance and extend the lifespan of joints.

Nominal Torque(N.m)

X/B Series  Cycloidal reducer

Double reducer

B10/X32

         99-7569

0.37-0.18

175

B20/X42

1.1-0.18

600

B31/X53

2.2-0.25

1250

B41/X63

2.2-0.25

1179-2500

B42/X64

4-0.55

2143-2500

B52/X84

4-0.55

2143-5000

B53/X85

7.5-0.55

5000

B63/X95

7.5-0.55

5893-8820

B74/X106

11-2.2

11132-12000

B84/X117

11-2.2

11132-16000

Main Features

All planetary cycloidal reducer rotating device can be divided into three parts:input part,deceleration part and output part.

Dislocation on the input shaft is equipped with a 180℃ of double eccentric sleeve,equipped with two ball bearings on the eccentric sleeve,the formation of H two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway,and by a groud of cycloid gear and pin gear ring of gear meshing,less bad tooth meshing reduction mechanism to form,(in order to reduce friction,in small ratio of speed reducer,the needle with needle teeth on the gear set).
When the input shaft with eccentric sleeve rotation for a week,as a result of the cycloid gear tooth profile curve characteristics and restricted by needle on the gear teeth,the movement of the cycloid gear becoming both revolution and rotation of the plane movement,and input shaft are
made for a week,eccentric sleeve also turn the week,cycloid gear in the opposite direction around a big tooth difference reduction is obtained, then with the help pf W output mechanism,the cycloid gear rotates at low speed movement through the pin shaft,passed to the output shaft,low output speed can be achieved.

The Designation of Cycloidal Reducers

Example: BL(E)D41-1225-0.37-WB: B series cyclo drive gearboxL: Vertical mounted with flange, Shaft downward(E): None-one stage, E-two stage, S-three stageD:Standard electric motors41: Model number 411225: Speed Reduction Ratio

0.37: Electric motor power:0.37kwW: Mounting way.

Basic Parameters

Power range: 0.25 – 90kW

Output speed(r/min): 0.011 – 161Output Torque(N.M): Top to 22920N.m

All models of this cycloidal motor reducer are
BW0、、BWD0、BW1、BWD1、BW2、BWD2、BW3、BWD3、BW4、BWD4、BW5、BWD5、BW6、BWD6、BW7、BWD7、BW8、BWD8、BW9、BWD9、BL0、BLD0、BL1、BLD1、BL2、BLD2、BL3、BLD3、BL4、BLD4、BL5、BLD5、BL6、BLD6、BL7、BLD7、BL8、BLD8、BL9、BLD9、
BWE20、BWED20、BWE30、BWED30、BWE31、BWED31、BWE41、BWED41、BWE42、BWED42、BWE52、BWED52、BWE53、BWED53、BWE63、BWED63、BWE74、BWED74、BWE85、BWED85、BWE95
BW12、BWD12、BW15、BWD15、BW18、BWD18、BW22、BWD22、BW27、BWD27、BW33、BWD33、BW39、WD39、BW45、BWD45、BW55、BWD55、
BL12、BLD12、BL15、BLD15、BL18、BLD18、BL22、BLD22、BL27、BLD27、BL33、BLD33、BL39、LD39、BL45、BLD45、BL55、BLD55、
BWE1512、BWED1512、BWE1812、BWED1812、BWE2212、BWED2212、BWE2215、BWED2215、BWE2715、BWED2715、BWE2718、BWED2718、BWE3318、BWED3318
XW0、XW1、XW2、XW3、XW4、XW5、XW6、XW7、XW8、XW9、XW10、XW11、XW12
XWD1、XWD2、XWD3、XWD4、XWD5、XWD6、XWD7、XWD8、XWD9、XWD10、XWD11、XWD12
XL0、XL1、XL2、XL3、XL4、XL5、XL6、XL7、XL8、XL9、XL10、XL11、XL1
XLD1、XLD2、XLD3、XLD4、XLD5、XLD6、XLD7、XLD8、XLD9、XLD10、XLD11、XLD12
XWED20、XWED32、XWED42、XWED53、XWED63、XWED74、XWED84、XWED85、XWED95、XWED106、XWED128
XLE20、XLE32、XLE42、XLE53、XLE63、XLE74、XLE84、XLE85、XLE95、XLE106、XLE128
XLED20、XLED32、XLED42、XLED53、XLED63、XLED74、XLEDK84、XLED85、XLED95、XLED106、XLED128
XJ0、JXJ0、XJ1、JXJ1、XJ2、JXJ2、XJ3、JXJ3、XJ4、JXJ4、XJ5、JXJ5、XJ6、JXJ6、
XJL0、JXJL0、XJL1、JXJL1、XJL2、JXJL2、XJL3、JXJL3、XJL4、JXJL4、XJL5、JXJL5、XJL6、JXJL6、XJE10、JXJE10、XJE20、JXJE20、XJE31、JXJE31、XJE41、JXJE41、XJE42、JXJE42、XJE52、JXJE52、XJE53、JXJE53、XJE63、JXJE63、
XJLE10、JXJLE10、XJLE20、JXJLE20、XJLE31、JXJLE31、XJLE41、JXJLE41、XJLE42

Reduction ratio mainly is 7,9,11,17,23,29,35,43,59,71,87,99,121,187,289,391,493,595,731,841,1003,1225,1505,1849,2065,2537,3481,4189,5133,7569.

Paint Color: Various
Material: Rugged cast iron or ductile housings
Lubrication: Grease or oil lubricated models available.
Seals: Nitrile material, dual lipped, double output seals available.
Working: 24 hours continuous available and shaft forward reverse
Reducer Reduction: Internal planetary gear mechanism with trochoidal curved tooth profile.
Atmosphere: Well ventilated location, free of corrosive gases, explosive gases, vapors and dust

Application :

• Conveyors • Sawmills and Wood Mills • Food Machinery • Wastewater Treatment• Mixers • Steel Mills • Automotive Plants • Construction Equipment• Paper Mills • Recycling Machines • Poultry Plants • Processing Plants• Oil Press Machine • Rotary Feeder

What are our unique advantages in making Cycloidal Reducers your choice factory infrastructure investment?

we can help you:

● Providing proper type gearbox and combined gearbox to meet your application needs;
● Better managing maintenance cost and lifting operation efficiency;
● Improving production capacity and boosting economic profitability.

cycloidal gear reducer is widely used in many industries such as Textile manufacturing and food industry. it is small but very good quality. This kind of gear reducer can divided into three parts, the input , the reduction part and the output shaft. There is a double eccentric locking collars in the input part. when input shaft turns a round, the eccentric locking collars will also turns a round so that transfer to the reduction part. to make the output shaft turns. so it make torques. Efficiency can get to 95% . Usually, there are two mounting way and this is vertical mounting.It can be widely used in industry of Coal, steel, machinery, chemical, textile, mixer etc. This can have one stage, two stages and three stages reduction gear. If you want it with flange, we can make. the price with flange or without flange is same.

How to choose a proper type of Gearbox : It is recommended that as much as possible of the following information be given in the enquiry or order so that a check can be made and advice given on the most suitable size of Worm Speed Reducer for any application.1.Type of prime mover.2. Horse-power of prime mover.3. Output torque required from driven member. 4. Input speed of gear unit.5. Output speed of gear unit. 6. Configuration of drive required and shaft disposition. 7. Total daily hours of running. If running is intermitteTo get the type-choose reference,please contact our technical rep or sales rep .

Characteristics:

1.Cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.
2.Pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, strong overload capacity, low vibration and noise, a variety of models, small noise.
3. The use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.
4. Compact structure, small volume: compared with other reducer with the power of the above weight, small volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest possible size.

Cycloidal drive vs. planetary gear When it comes to large transmission ratios in a compact design, two gear types are particularly suitable: The planetary gear and the cycloidal drive. The similarities between the two gear types become particularly clear when the ring gear of the planetary gearbox is fixed. The gearbox is driven by the sun gear and the output is done by the carrier.Animation: Operating principle of a planetary gear with fixed ring gearIn the case of the planetary gear, the rotary axes are the axes of the planet gears (shown in blue) and in the case of the cycloidal gear, the axes of the cycloidal discs. While the planet gears are driven by a sun gear, the cycloid discs are driven by an eccentric shaft. As they rotate, the planet gears move around the inside of the ring gear. In the same way, the cycloid discs rotate around the fixed pins arranged in a circle. The motion of the planet gears drives the carrier and transmits the power to the output shaft. In the same way, the motion of the cycloidal discs drives a pin disc, which in turn transmits the power to the output shaft. Planetary gear Cycloidal drivemoving axlesplanet gears cycloidal discsdriven by sun gear eccentric shaftorbiting ring gear fixed ring pinsdriving the carrier pin disc

Compared to planetary gears, cycloidal drives are very robust against shock loads. In addition, cycloidal drives achieve significantly better positioning accuracy due to their very low backlash and high torsional stiffness. Therefore cycloidal drives are ideally suited for all types of drive technologies (e.g. for servo motors in robotics) and especially for heavy loads.Cycloidal drives generally have a lower mass and a more compact design than planetary gears, especially at high transmission ratios, and have a longer service life. At relatively low gear ratios of less than 20, however, planetary gears usually offer better advantages and higher efficiency, depending on the application.

Our Company

HangZhouYinxin Electromechanical Facilities Co. Ltd

HangZhouYinxin Electromechanical Equipment Co., Ltd.is a gift enterprise integrating development, design, production and sales,Main promoting products include reducer motor,water pump,construction machinery and parts,bearings,hardware and electrical equipment,plastic products,Labour protection appliance.Our company always follow the operation concept which contains people-oriented, innovation as the soul,be prepared for danger in times of peace, unremitting……

Application area

What do our customers use CycloiCustomer Support EPG is committed to offering world class customer support, for both current and legacy products, putting you, our customer, at the heart of everything we do, we really are with you at every turn.dal Drives for?Cycloidal Drive Gear Motor for Travel Motors in Automated Guided VehiclesCycloidal Drive Gear Motor for Production Line Conveyor SystemsCycloidal Drive Gear Motor for Chemical Industry Mixers & AgitatorsCycloidal Drive Gear Motor for Pumping, Cooling & Lubrication SystemsCycloidal Drive Gear Motor for Metalworking MachinesCycloidal Drive Gear Motor for Construction MachineryGear Motor for Water Treatment PlantsGear Motor for Recycling MachineryGear Motor for Steel Industry ProductionCycloidal Drive Gear Motor for Sawmills and Woodworking MachinesCycloidal Drive Gear Motor for Food & Sugar Industry Production LinesCycloidal Drive Gear Motor for Heavy Materials Transportation in Rolling MillsCycloidal Drive Gear Motor for Paper Industry Production Lines

Certifications

Sales territory

Packing & Delivery

Packaging

Size

500 (L) * 500 (W) * 400 (D)

Weight

1.2 T

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Packaging

Size

500 (L) * 500 (W) * 400 (D)

Weight

1.2 T

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

FAQ

Q1: Are you trading company or manufacturer ?

A: We are a manufacturer in ZJ China.welcome to our factory to have a visit.

Q2: How we select models and specifications?

A:You can email us the series name & code (for example: WJ series worm gearbox) as well as requirement details, such as motor power, output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings, it is better.

Q3: How is your price? Can you offer any discount?

A: We will give the best price we can base on your needs and the quantities.

Q4: How long should I wait for the feedback after I send the enquiry?

A: Within 12 hours.

Q5: What is your product warranty period?

A:We offer one year warranty since the vessel departure date left China.

Q6: What industries are your gearboxes being used?

A:Our gearboxes are widely applied to metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment and so on.

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory High  in Aden Yemen  torque cycloidal speed reducer BWD2 cycloid gearbox with motor With high quality best price

Best China manufacturer & factory RC helical gear units robot arm speed gearbox gear reducer speed variator transmission parts With high quality best price

Best China manufacturer & factory RC helical gear units robot arm speed gearbox gear reducer speed variator transmission parts With high quality best price

The group has taken part in the making and revising of ISO/TC100 international chain standard several years in success and hosted the 16th ISO/TC100 International annual meeting in 2004.

Overview

Quick Details

Applicable Industries:

Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms, Construction works

Place of Origin:Zhejiang, China
Brand Name:

OEM

Gearing Arrangement:

Helical

Output Torque:

3.5~500N.m

Input Speed:

1450/960rpm

Output Speed:

14-280rpm

Ratio:

3.77~50.4

Certification:
As an employee owned company, we are committed to exceeding our customers’ expectations through every stage of the gear manufacturing process. For custom worms and worm gears made to your exact specifications, you can feel confident turning to Gear Motions.

ISO9001-2008

Mount Position:

Foot Mounted

Bearing:

C&U,LYC, HRB,ZWZ,SKF,NSK

It is our aim to supply a vast range of quality products at affordable prices, provide the best service for customers satisfied and contribute to our continued improvement.

Supply Ability

Supply Ability:
500 Unit/Units per Month

Packaging & Delivery

Packaging Details
Wooden boxes , Cantons packed in 1 pallet
Port
Ningbo Port, Shanghai Port

Online Customization

EPG GROUP PTO shafts can be used for speeds up to 1000 rpm. The maximum working length of the PTO shafts varies according to the size of the tubes The range of the PTO shafts of RPG GROUP includes 4 series , according to the tube shape

Products Description

Die-cast aluminum cabinet, light weight and good strength. The surface is specially treated, the appearance is not easy to scratch

Exquisite design, compact structure, low noise

Helical gear design, tooth meshing rate is generally more than twice that of spur gears, with the characteristics of stable operation, high output torque and low backlash

Related product

Company Profile

Packing & Delivery

Best China manufacturer & factory RC helical gear units robot arm speed gearbox gear reducer speed variator transmission parts With high quality best price

Best China manufacturer & factory RC helical gear units robot arm speed gearbox gear reducer speed variator transmission parts With high quality best price

Best China manufacturer & factory RC helical gear units robot arm speed gearbox gear reducer speed variator transmission parts With high quality best price

Best China manufacturer & factory XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor With high quality best price

Best China manufacturer & factory XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor With high quality best price

Great attention has been paid on environmental protection and energy saving.

Overview

Quick Details

Applicable Industries:

Building Material Shops

Gearing Arrangement:

Helical

Output Torque:

137~9800 N.m

Input Speed:

1400rpm

Output Speed:

46~280RPM

Place of Origin:Zhejiang, China
Brand Name:

OEM

Accudrive Servo Gearheads Servo drives from EPG Drive benefit from the expertise and innovation of our more traditional brands. Available in both right angle and inline configurations, coupled with the availability of multiple precision levels, you are sure to find the right product for your application.EPG Drive Accudrive Servo Gearhead

Color:

Blue / Grey / Customer requirement

Supply Ability

Our products is popular exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Middle and South America, Thailand, Pakistan, Indonesia, more than 60 countries and regions.

Supply Ability:
2000 Set/Sets per Month

Packaging & Delivery

Packaging Details
wooden Case per pc + many pcs in wooden case or as requested
Port
Chinese Port
Lead Time
:
Quantity(Boxes) 1 – 5 >5
Est. Time(days) 35 To be negotiated

Online Customization

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor

Product Description

 Conveyor & Material Handling


  Mining & Quarry

SLXG 

Shaft Mounted Reducer

Output Shaft Bore  [mm]

Ratio(i)

Rated torque

SLXG30

Φ30

7, 10, 12.5

180N.m

SLXG35

Φ35

5,10,15,20,25

420N.m

SLXG40

Φ40

5,10,12.5,15,20,25

900N.m

Φ45

SLXG45

Φ45

5,10,12.5,15,20,25

1400N.m

Φ50

Φ55

SLXG50

Φ50

5,10,12.5,15,20,25

2300N.mPTO Adapters To avoid potential connectivity issues, you may want to consider a PTO Adapter for your tractor. The PTO adapter extends the connection to the implement, providing additional space for the PTO shaft to turn without touching the Arm Weldment or other parts of your tractor or the implement.

Φ55

Φ60

SLXG60

Φ60

5,10,12.5,15,20,25

3600N.m

Φ70

SLXG70

Φ70

5,10,12.5,15,20,25,31

5100N.m

Φ85

SLXG80

Φ80

5,10,12.5,15,20,25,31

7000N.m

Φ100

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor

Company Information

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor 

Certifications

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor 

Our Services

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor 

Packaging & Shipping

XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyorXG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor 

Related Products

 

FAQ

: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

Contact us

 

Best China manufacturer & factory XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor With high quality best price

Best China manufacturer & factory XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor With high quality best price

Best China manufacturer & factory XG series shaft mounted speed reducer motor for Mining Industry Gear box gearbox for conveyor With high quality best price

Best China manufacturer & factory SLH Series electric power speed reducer High power windmill gearbox drive power transmission With high quality best price

Best China manufacturer & factory SLH Series electric power speed reducer High power windmill gearbox drive power transmission With high quality best price

Advanced thermo treatmentThe PTO shaft included with all Victory Tractor mowers has a longer extension than the typical PTO Shaft. The added length is necessary because of the far reaching movement of the mowers to the right of the tractor. equipment, such as network heat treatment oven, multi-use thermo treatment oven, etc.

Overview

Quick Details

Applicable Industries:

Building Material Shops

Gearing Arrangement:

Helical

Output Torque:

470000Nm

Input Speed:

750-1500rpm

Output Speed:

1.7~1200rpm

Place of Origin:Zhejiang, China
Brand Name:

OEM

Certification:

ISO9001-2008

We warmly welcome the friends from all the world!

Mount Position:

Foot Mounted

Bearing:

C&U

Supply Ability

Supply Ability:
500 Unit/Units per Month

Packaging & Delivery

Packaging Details
Standard wooden case
Port
Ningbo Port, Shanghai Port

Online Customization

SLH Series electric power speed reducer High power windmill gearbox drive power transmission

Product Description

High power windmill gearbox has the features of high veDue to these features, typical worm gear applications include presses, small engines, lifts and elevators, rolling mills, conveying engineering, mining industry machines, on rudders, and worm drive saws.rsatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency, low vibration and high permissible axis radial load. 

1) Output speed: 1.7~1200r/min

2) Output torque: up to 47,000N.m
3) Motor power: 2.52~5366kW
4) Mounted form: foot-mounted ,flange-mounted, axis mounted, shrink mounted

Product Name

H/B series high power speed gear reducer industrial gearbox for concrete mixer

Housing Material

HT 250 Cast Iron

Gear Material

20CrMnTi

Shaft Material 

20CrMnTi

Gear Processing

Grinding finish by HOFLER Grinding Machines

Color

Customized

Noise Test

Bellow 65dB

Warranty

1 year

SLH Series electric power speed reducer High power windmill gearbox drive power transmissionSLH Series electric power speed reducer High power windmill gearbox drive power transmissionSLH Series electric power speed reducer High power windmill gearbox drive power transmission

Company Information

SLH Series electric power speed reducer High power windmill gearbox drive power transmission 

Certifications

SLH Series electric power speed reducer High power windmill gearbox drive power transmissionSLH Series electric power speed reducer High power windmill gearbox drive power transmission 

Our Services

SLH Series electric power speed reducer High power windmill gearbox drive power transmission 

Packaging & Shipping

SLH Series electric power speed reducer High power windmill gearbox drive power transmissionSLH Series electric power speed reducer High power windmill gearbox drive power transmission 

Related Products

 

FAQ

: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

Contact us

 

Best China manufacturer & factory SLH Series electric power speed reducer High power windmill gearbox drive power transmission With high quality best price

Best China manufacturer & factory SLH Series electric power speed reducer High power windmill gearbox drive power transmission With high quality best price

Best China manufacturer & factory SLH Series electric power speed reducer High power windmill gearbox drive power transmission With high quality best price

K China best factory Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

K  China best factory Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

Our AdvantagesProducts Big volume in Stock, No MOQ required We comply with all the international standards, such as ISO9001 and TS16949 standards.

Overview

Quick Details

Applicable Industries:

Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, farms, restaurant, HOME USE, Retail, Food Shop, Printing Shops, Energy & Mining, Food & Beverage Shops, Advertising Company, Construction works

Place of Origin:Zhejiang, China
Brand Name:

OEM

Gearing Arrangement:

Helical

Output Torque:

10~62800N.m

Input Speed:

1450/960rpm

Output Speed:

14-280rpm

Ratio:

5.36~197.37

Certification:

ISO9001-2008

Mount Position:

Foot Mounted

Bearing:

LYC, HRB,ZWZ,NSK

Supply Ability

Supply Ability:
500 Unit/Units per Month

Packaging & Delivery

Packaging Details
Wooden boxes , Cantons packed in 1 pallet
Port
Ningbo Port, Shanghai Port
Lead Time
:
Quantity(Boxes) 1 – 1 >1
Est. Time(days) 20 To be negotiated

Online Customization

Product Description

K Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

SLK series gearbox is one kind of Helical Bevel type gearbox , High-stainless cast iron case . ,it is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of working condition .High Transmission efficiency ,Low energy consumption, superior performance . The hard tooth surface gear use the high quality alloy steel , the process of carburizing and quenching, grinding ,which give it follow characters : Stable transmission , low noise and temperature ,high loading ,long working life. which widely use for industry equipment of metallurgy ,Building Material , Chemical , Mining , Oil, Transportation , Papermaking , Sugar making , engineering Machines ,etc

Specifications:

1) Output speed: 0.6~1,028r/min

2) Output torque: up to 21700N.m

3) Motor power: 0.12~200kW

4) Mounted form: foot-mounted and flange-mounted mounting

Product Name

SLK Series  Rigid Tooth  helical bevel reducer 

Gear Material

20CrMnTi 

Case Material

HT250

Shaft Material 

20CrMnTi

Gear Processing

Grinding finish by HOFLER Grinding Machines

Color 

Customized

Noise Test

65~70dB

Efficiency

94%~98% (depends on the transmission stage) 

Lubricating oil

Shell Omala synthetic oil or mineral oil , or similar brand 

Heat treatment

tempering, cementiting, quenching,etc.

Brand of bearings

C&U bearing, ZWZ,LYC, HRB, SKF,NSK and so on

Brand of oil seal

NAK or other brand

Temp. rise (MAX)

40 °

Temp. rise (Oil)(MAX)

50 °

Vibration

≤20µm

Products Show

Quality Control

High quality Gear Grinding

The gears are taken grinding finish to make sure the long life  

Gear Test

Gears are taken inspection test  to make sure they are qualified for assembling

High quality Gearbody 

Gear bodies processed by our new imported CNC centers,make sure the high precision and clean finish

Our Company

Factory

Our Factory

Workshop

Our Workshop

Packing & Delivery

Packing Details  : Packing, solid bicycle saddle, 50pcs/carton

Delivery Details : 3-30 days after order of Solid bicycle tire tubes

1. Special logistics packaging

2. Suitable carton size

3. Shock bubble film

4. Professional placement

5. Professional shock

6. Complete package

Our Certifications

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

Contact

K  China best factory Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

K  China best factory Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

K  China best factory Series helical-bevel gear box with AD k series gear ratios small 90 degree gearbox motor Speed Reducer dodge transmission

Worm Manufacturers & Suppliers Speed Reducer Gearbox gear box manufacturer

Worm  Manufacturers & Suppliers Speed Reducer Gearbox gear box manufacturer

We can offer a complete-selection of electrical power transmission items like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes.

Overview

Rapid Information

Applicable Industries:

Production Plant, Equipment Mend Shops, Meals & Beverage Factory, Farms

Spot of Origin:Zhejiang, China
Brand Identify:

OEM

Gearing Arrangement:

Worm

Output Torque:

five-4320N.m(Single)

Enter Pace:

900-1800rpm

Output Speed:

fourteen-280rpm

Product Amount:

FCA

Rated Electrical power:

.12~15KW

Solution Title:

Worm Velocity Reducer Gearbox equipment box producer

Mounting Place:

Foot Mounted, Flange Mounted

Output Type:

Sound Shaft, Hollow Shaft

Content of Housing:

Casting Iron

Materials of Shaft:

Chromium Metal

Oil Seal:

NAK

Bearing:

C&U

Warranty:

12 Months

Supply Capacity

Source Potential:
200000 Set/Sets for every Yr

Packaging & Shipping

Packaging Specifics
Common export packing and picket pallets packing
Port
Shanghai or Ningbo Port

On-line Customization

NMRV worm gearbox reducer is a commodity with advanced style and continuous enhancements, its main features are manufactured of higher good quality aluminum alloy, light fat and non-rusting, larget output toque, easy operating and reduced noise, high radiating performance, excellent searching apprearance, derable services lifestyle, tiny quantity and appropriate for all mounting positions.

Output Torque

1.eight-1760Nm

Application

Machinery Sector

Gear Materials

Zepgn12-two (BS-1400 Grade-PB2)

Input Speed

900-2800RPM

Output Pace

ten-250RPM

Relevant product

Firm Profile

Packing & Shipping and delivery

Helical Chinese Factory Wholesaler & Exporter worm gearbox agriculture speed reducer

Error: