DUMP TRAILER Energy UNIT- SINGLE ACTING
This power unit features a energy up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is often supplied if necessary. Also a strain compen sated flow handle may be extra to the circuit to regulate the descent speed from the cylinder.
Remark: Please consult our revenue engineer for the diverse pump displacement, motor power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of installation of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities.N46 hydraulic oil is encouraged.
four. The electrical power unit needs to be mounted horizontally.
5. Check the oil level within the tank right after the initial running from the energy unit.
6. Oil changing is required following the preliminary 100 operation hrs, afterwards once every single 3000 hrs.
DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This energy unit includes a power up energy down circuit with load holding on each A & B ports. A strain compensatred movement management is often added to circuit to regulate the decent pace of the cylinder.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned ahead of set up of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is proposed.
four. The electrical power unit must be mounted horizontally.
five. Check the oil level from the tank just after the original running of the energy unit.
six. Oil modifying is required following the preliminary a hundred operation hours, afterwards when each 3000 hours.