ep

December 28, 2020

The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nevertheless, in response for the demands for smaller sized chains in recent years for substantial engineering machinery such as workplace tools, medical machines and industrial robots, we present 15 of 4.7625 mm (3/16 inch) pitch and in addition 15H1 being a high-power edition of 15. These substantial precision chains are manufactured under serious high quality handle especially essential for tiny sizes, taking put on resistance also into consideration.
Variety of chain
Refer towards the “Low-speed selection”. Even so, the chain operation pace might be set considerably substantial dependant upon the kind of lubrication as shown while in the table under.
Connecting back links and offset backlinks
R connecting links are employed for tiny pitch chains. Nonetheless, given that their power is lower than that from the base chain, and because the clip is likely to come off in high speed operation, the usage of connecting hyperlinks isn’t encouraged. Use a loop chain without attaching connecting back links.
Offset backlinks are available for chains apart from 15 and 15H1, but their use will not be suggested for your very same cause as stated for the R Connecting hyperlinks.
Working velocity and sort of lubrication
15: A large precision mini-pitch bushing chain that may be smaller than a compact drive chain for standard applications, 25
25: Smallest bushing chain amongst ANSI conventional chains utilizing curl bushings.
35: A ANSI typical bushing chain suitable for tiny precision machines that need large strength.